Front Brake Pads Brake Pads Sport Approved Piaggio Quartz 50 V

Malossi is proud to offer its customers a complete range of brake pads suitable for all uses, from road to racing. Our products are the result of a careful research and development phase that culminates in exceeding the standards required for approval by a prestigious body such as DEKRA.

SPORT	BRAKE PADS SPORT
	Malossi Brake Pads SPORT are brake pads made with organic friction material, completely free of asbestos. This product line represents…excellence in the replacement of original equipment pads. The compound of these pads guarantees good durability, without penalizing braking efficiency. With BRAKE PADS SPORT, excellent performance is combined with high braking modulation, allowing you to stop your vehicle with great safety and control in all conditions.
MHR SYNT	BRAKE PADS MHR SYNT
	Pads with sintered friction materialhave the highest coefficient of friction everAnd for this reason they guarantee shorter stopping distances with breathtaking decelerations. Their peculiarity is the ability to maintain constant performance regardless of temperature and weather conditions. The friction material is obtained through the sintering of metal powders and other copper-based elements, resulting in a compound that enhances braking power without penalizing durability.
MHR	BRAKE PADS MHR
	The friction material of the BRAKE PADS MHR pads is made from completely organic fibres and is absolutely free of asbestos.The compound has been specifically designed for racing useAnd minimizes fading. The MHR BRAKE PADS reach the point of maximum performance in the shortest possible time, while maintaining perfect consistency of performance and exemplary braking modulation from the first to the last lap of a race, an essential condition for use on the track. The compound of these pads contains elements that prevent the friction material from burning when subjected to strong stresses, such as those created during a competition!

APPROVAL

Malossi is committed every day to improving the quality, performance and safety of its products and in this perspective the proposal of a range of brake pads is placedAPPROVED.

It is very important to us that our customers are confident that theMALOSSI PADSAndMALOSSI SYNT PADSAre in line with the strict standards imposed by homologationECE R90And can be used on road vehicles throughout Europe and in many countries around the world.

HOW PADS ARE APPROVED MALOSSI?

To obtain this certification, the MALOSSI PADS must pass some road tests performed on the vehicle for which the pads are intended. During these tests, efficiency is verified through a series of braking both "cold" and under stress, to evaluate the resistance of the pad and its braking capacity at different speeds. Sensitivity tests are also foreseen to evaluate what pressure variation is needed to obtain the same deceleration value at three different speeds. In addition to road tests, the material with which the pads are made is also subjected to laboratory tests such as resistance to compression and shear.

Malossi has obtained the certificationE/ECE/324-E/ECE/TRANS/505 Regulation No. 90With the collaboration of Dekra, a true giant in the certification sector. The vehicle tests were carried out by Dekra inspectors at the Balocco Proving Ground and at the Dekra Test Centre in Cinisello Balsamo,and have exceeded the ECE R90 regulation by a wide margin!

THE FULL RANGE OF PADS MALOSSI IT IS DESIGNED AND MADE IN ITALY