VMC Braided Hose Kit for Vespa Disc Brake
VMC Braided Hose Kit for Vespa Disc Brake
The kit was designed and created for those who mount the disc brake on both the small and large frame Vespa
It is made with high quality braided hose produced in Europe, it is 1450mm long and complete with 3 different fittings to adapt to every fork
One of the 3 fittings is crimped to the tube while one of the 2 fittings available in the kit must be connected to the other end of the tube
The process is to run the tube through the fork and handlebars, cut it to size and then make the final connections.
To connect the screw-on fitting to the pipe, you need to remove a portion of the plastic outside the braided pipe for a length of approximately 35mm.
so that the external fitting can pass through (see photo)
Specific References
In Italy and Europe Via GLS / DHL / Fercam
24h from order confirmation
Secure via Paypal, Credit Card, Bank Transfer, Installment Payment
Related products
Questions
Be the first to ask a question about this product!