Vespa smallframe crankcase shim kit
Vespa Smallframe Engine Crankcase Shaft Kit
Shims are used to align the gearbox more precisely or to eliminate any play.
ONLY THE NECESSARY SHIM PIECES NEED TO BE FITTED, NOT NECESSARILY ALL OF THOSE IN THE KIT.
The kit consists of:
- no. 4 shims thickness 0.10mm external diameter 47mm
for main bearings, bell bearing, wheel axle bearing.
- no. 4 shims thickness 0.10mm internal diameter 10mm
to thicken the gear multiple towards the clutch
- nr. 3 shims thickness 0.10mm internal diameter 25mm
to be used as a shim between the bell bearing, the bell and its seeger
- no. 3 shims thickness 0.30mm external diameter 14.98mm
to be used as a shim between the kickstart selector pin and the crankcase.
On some crankcases and with some aftermarket kickstart selectors it is necessary
put these shims in order to keep the starter gear at the right distance from the cluster
Specific References
In Italy and Europe Via GLS / DHL / Fercam
24h from order confirmation
Secure via Paypal, Credit Card, Bank Transfer, Installment Payment
Related products
Questions
Be the first to ask a question about this product!