SIP Tubeless MY Rim - 2.10 Black For Classic Vespa 10" - 81061620

Particularly light tubeless rim "MY" in a sporty, open design for classic Vespa scooters with 10-inch tyres.

In addition to the standard SIP tubeless rim, we offer the sporty anniversary rim MY. The designation "MY" refers to the last built Vespa of the PX series, some of which have >Millennium< in their name. These Millennium PXs are typically equipped with the 5-star brake drum on the front axle, to which our new MY tubeless rim with its 5 recesses fits particularly harmoniously.

Open design perfectly matched with the PX98/MY front brake drum

Exact concentricity and balance

Greater safety thanks to double hump technology

With ABE as front wheel

The new, elegant design with symmetrical flanks of the tire bed appears harmonious and perfectly matched to the brake drum of the PX`98/MY/LML Star Vespa models. The new design also fits very well to all other Vespas with 10-inch rims and 5-hole wheel mounting. The standard width of 2.10 inches makes them compatible with almost all models from approx. 1962 onwards. Here, too, the 5 cut-outs ensure a sporty, slim and open shape; particularly visible are the imaginative brake parts such as the brake disc, brake caliper and shock absorber.

The SIP MY rim is based on the 2.0 generation of SIP tubeless rims:

The rim impresses with improved handling and increased agility. The 90% CNC-machined surface virtually eliminates concentricity errors and imbalance and ensures absolutely vibration-free operation up to the highest speeds.

Of course, the MY rims also meet the highest SIP standards in their safety design. The ETRTO-like shaped tire bed with double hump technology reliably prevents sudden tire slippage in the event of a loss of pressure. The mounting space is designed and optimized to be as wide as possible.

In addition to the low weight and slim design, all the advantages of SIP tubeless rims remain:

No sudden air loss thanks to the state-of-the-art double-bump technology. Can also be driven with low tire pressure

No more inner tubes that can get pinched during assembly and may leak during operation.

An enlarged mounting compartment makes tire mounting even easier and more comfortable.

Suitable for all tubeless tyres from 90-90 over 3.00 and 3.50 up to 110-90/10

The SIP MY and ABE edge

SIP has also carried out all the necessary tests with this rim and has obtained the general operating permit (ABE) from the German Federal Motor Transport Authority (KBA). The ABE is valid for the use of the MY rim as a front wheel; if you want to be on the safe side with the TÜV, you can combine the standard rim 8106 without cutouts on the rear axle.

The current version of the ABE is available in the downloads.

Note on tire mounting: Many tubed tires (TT) can also be used as tubeless tires (TL). Check the clearance to adjacent parts before using the tire. Have the tires mounted by a specialized company. Do not damage the tires. Use only the tire mounting paste provided. Do not use oil, silicone, soap or other lubricants! Use only Nord-Lock NLX8 washers and tighten them to the specified torque (25-28 Nm).

You can find an assembly video here on our YouTube channel SIP Tutorial.

Conclusion: New sporty design and proven innovative concept. High quality workmanship, with safety plus and approval.

Technical details of the SIP MY rim

Aluminum rim

Painting

10 x 2.10 inches

Without inner tube

Cap nuts, SW12 key and NORD-Lock washers.

Long valve

With ABE as front wheel and assembly instructions, see download area.

We recommend for the best configuration - SIP -TIP:

Spacer kit for use with wide, low profile tires and spaced clutch covers.

Rim protectors protect especially tubeless rims during assembly.

Put the tire spray in the glove compartment

Order the SIP tubeless rim mounting kit so that the spare wheel with tubeless rim also fits under the side panel!

Tyre and rim fitting service available