SIP PERFORMANCE front shock absorber For Vespa Rally, GT, Sprint 78000FSL
for Vespa 125 V30-33/VM/VN/ACMA/Hoffmann C/VNA-TS/150 VL/VB1/VD/VGLA/B/VGL1/GS/VBA- Super/Rally/P150S
- L = 175/210 mm
- Bodies: Silver
- Hardness: 100 PSI
- Location: Eyelet/Eyelet
- Without TÜV test report
SIP performance shock absorbers for all Vespa models with a separate spring and damper suspension. Aluminum, CNC machined, anodized
One of the main goals in designing the SIP Performance shock absorber was to provide optimal damping during the rebound phase. The rebound damping ensures a clean and even shock absorber at a controllable speed. This causes, for example during braking, the front end of the scooter to recover smoothly and remain controllable without acting like a pogo stick!
Installation instructions: When the spring is too weak, it creates an ineffective angle with the suspension. A stiffer spring is therefore required.
When converting from 8" to 10" wheels the following must be considered: The steering column mounting point of the shock absorber is located significantly low. Additionally, the fender tends to be undersized for a 10" wheel. This makes contact between the two inevitable during braking.
Specific References
In Italy and Europe Via GLS / DHL / Fercam
24h from order confirmation
Secure via Paypal, Credit Card, Bank Transfer, Installment Payment
Questions
Be the first to ask a question about this product!