STAGE6 R/T PIT BIKE / MINIGP 305 - 325MM REAR SHOCK ABSORBER

STAGE6 R/T PIT BIKE / MINIGP 305 - 325MM REAR SHOCK ABSORBER

Stage6 R/T Pit Bike / MiniGp 305 - 325mm rear shock absorber. Building on its historical and multi-victorious experience in the field of suspensions for small two-wheelers, Stage6 has developed a new shock absorber specifically for the Pitbike / MiniGP sector.

The construction and quality features of the shock absorber are the same as those of the multi-winning R/T shock absorbers, which today represent the highest standard in the industry. Stage6 has not compromised on any detail. All external and internal parts of this shock absorber are anodized, minimizing wear and oil contamination. This contributes significantly to the longevity of the product and extends the service intervals as well as the consistency of the suspension performance itself.

The shock absorber is adjustable in compression, extension and spring preload. The internal hydraulics are designed so that the compression and extension adjustments are completely independent of each other.

The Stage6 R/T shock absorber dedicated to Pitbike and MiniGP was developed in close collaboration with the best pilots, in the most demanding conditions and on numerous tracks. The calibration was decreed as the result of numerous tests carried out on the track and on suspension test benches.

The shock absorber's wheelbase can be adjusted both through the lower eyelet and through a spacer located in the upper part of the shock absorber body; the latter can be removed, to make the shock absorber shorter. These 2 adjustments allow a variation of 20 mm and therefore to adapt the shock absorber to a wide range of models and riders.

Technical features:

Distance from center to center of hole: 305 - 325mm

Support width: 19.9mm

Eyelet diameter: 10 mm

Piston rod diameter: 14mm

Spring load: 950LB/INCH - 166N/mm, spring inner diameter 61mm

Compression: 20 clicks

Extension: 25 clicks